Puritech

Sugar syrup Deashing

 

In the deashing process of syrup, a bed of strong acid cation resin is typically followed by a bed of weak base anion resin.

When the syrup stream enters the deashing unit, it carries an ionic load made up of ash ( salts and mineral acids ), as well as organic compounds which come from the process water, corn starch, and various production additives.

This stream first passes through a bed of strong acid cation resin. The main function of the cation resin is to remove cations ( positively charged ions ) such as sodium, potassium, iron, magnesium, and calcium. The cation resin also removes some soluble protein by providing an acidic environment in which amphoteric proteins take on cationic characteristics. During this exchange process, hydrogen cations are released from the exchange sites.

The anions, e.g., chlorides, sulphates, nitrates, and other negatively charged ions associated with the exchanged cations, are passed on in the syrup stream as free acids. Consequently, when the syrup leaves the cation bed, the concentration of mineral and organic acids is high. The weak base anion resin in the free base form removes these acids, resulting in a syrup which is relatively free of ions ( de-acidified syrup ) as it leaves the unit pair. The weak base anion resin also removes some colour from the syrup.

Deashing typically is performed at two stages in the corn sweetener process, first on the dextrose side and again later on the fructose side.

The ION-IX continuous deashing system consists of two ION-IX contactors.

The first ION-IX unit contains the cation resin and the second ION-IX unit contains the anion resin.

Since ION-IX units are continuous, the following events take place at the same time in a continuous manner.

 

The feed is pumped into the cation unit, passes through the anion unit and enters the interstage tank.

From the interstage tank the solution is pumped through the polishing zone of the cation unit and the anion unit. The solution leaves the anion unit as a demineralised product.

The adsorption rinse water passes through the ION-IX unit and discharges in the interstage tank.

Dilute hydrochloric acid is used to regenerate the cation resin.

Dilute caustic is used to regenerate the anion resin.

Rinse water removes any residual regeneration chemicals and the rinse effluent is used to dilute the strip solution. The dilution takes place inside the ION-IX valve.

 

Ion exchange demineralisation has been shown to remove 95% of the ash content of the ultrafiltered syrup. In parallel with the ash removal, is an 80% reduction in color.

A cross regeneration of the cation and anion resin can be implemented.

In addition to the desalination and decolorization of sugar solutions, ion exchange resins are also used for the inversion (hydrolysis) of disaccharides, particuarly saccharose, and for the treatment of diluted sugary solutions. For example, they can be used to desalinate whey, grape must and fruit juices or to remove unwanted, excess acid and bitterness from orange juice.

 

Example of sugar syrup deashing units

 

 

Syrup deashing unit under construction